This arrival requires RNP 1 capability. Maximum indicated airspeed is 250 kt below 10,000 ft, with any lower limits specified for the selected branch. Tracks are magnetic; distances are nautical miles. All altitudes are feet above mean sea level unless a flight level is stated.
The table separates the small altitude labels printed along each leg from the mandatory waypoint crossing restrictions.
Runway 17
Cross AVBEG at or above 9,000 ft. This AVBEG restriction is explicitly marked for runway 17.
Turn right at GOONY onto 170°. From TALAG, follow RNP W runway 17 (AR) or VOR runway 17. AR denotes an authorization-required approach.
Runway 35
Turn left at LANYO, left at HONEY and left at DALEY, following the tracks above. From MENZI, continue on the assigned ILS, RNP Z, LOC or VOR runway 35 approach.
The runway 35 approach references are ILS-Y / LOC-Y, ILS-Z / LOC-Z, RNP Z and VOR. Select the assigned procedure; these alternatives have different distance references and minima.
Radio failure in instrument conditions
Set 7600. Follow the vertical-navigation requirements without descending below minimum sector altitude. Follow the latest STAR clearance to the nominated runway, then use the most suitable approach.
Frequencies
Sector altitudes and chart conventions
The 10 NM MSA is 5,100 ft. The 25 NM diagram is referenced to the YSCB aerodrome reference point: the northern/eastern sector bounded by chart bearings B-125° and B-250° is 4,600 ft, the southern sector between B-250° and B-075° is 7,500 ft, and the western sector between B-075° and B-125° is 5,900 ft. These are the bearing labels on the ARP diagram, not CB VOR radial labels.
Tracks are magnetic, elevations are feet AMSL, and distances in parentheses are NM. The diagram shows 12° E magnetic variation and is not to scale.
Published change: LANYO altitude requirement.
Chart SCBSR05-185, revised 27 November 2025, from the fixed publication cycle effective 3 September 2026.
Source: © Airservices Australia, Departure and Approach Procedures, SCBSR05-185. Last modified on October 30, 2026
