Skip to main content
This RNP 1 departure serves runway 34L. The initial climb gradient is 3.3%, with higher segment requirements below. Maximum IAS is 250 kt below 10,000 ft; retain the lower initial limit. The source warns of trees in the departure area.

Initial departure and route to TONTO

Track 335°. At 800 ft, turn left direct to SS500, keeping IAS at or below 240 kt until SS500. Thereafter, maximum IAS is 270 kt until NB511, still subject to the general 250 kt limit below 10,000 ft.

Required climb gradients

Transitions from TONTO

Frequencies

All frequencies are MHz.

Sector altitudes and chart conventions

The 25 NM minimum sector altitude is 2,700 ft, centred on the YSSY aerodrome reference point. The 10 NM minimum sector altitude is 2,100 ft. Bearings are magnetic, with 13° east variation. Altitudes are feet above mean sea level unless a flight level is stated. These route diagrams are not to scale. Published change: new procedure. Chart SSYDP14-187, revised 9 July 2026, from the fixed publication cycle effective 3 September 2026. Source: © Airservices Australia, Departure and Approach Procedures, SSYDP14-187.
Last modified on October 30, 2026