Skip to main content

Before departure

AVMOV One is an RNP 1 departure from runway 25 or 34L. Keep indicated airspeed at or below 250 kt below 10,000 ft, and at or below 260 kt until SS504. Both limits apply where they overlap. There are trees in the departure areas.

Runway 25

  1. Climb on track 242°. The required gradient is 3.9% to 300 ft, then 3.3%.
  2. At 1,500 ft, turn right, direct to SS500.
  3. Cross SS500 at or below 9,000 ft.

Runway 34L

  1. Climb on track 335°. The required gradient is 5.6% to 800 ft, then 3.3%.
  2. At 800 ft, turn left, direct to SS500.
  3. Cross SS500 at or below 9,000 ft.

From SS500 to AVMOV

The chart specifies a 6.9% required climb gradient to OGESO. The 260 kt speed limit applies until SS504.

Choose the cleared transition

All transitions begin at AVMOV. Distances are for each leg.

OLSEM–Y193–BANDA requirement

For aircraft cleared via OLSEM–Y193–BANDA, reach: Advise ATC if unable to comply.

Frequencies

All frequencies are MHz.

Sector altitudes and chart conventions

The 25 NM minimum sector altitude is 2,700 ft, centred on the YSSY aerodrome reference point. The 10 NM minimum sector altitude is 2,100 ft. Bearings are magnetic, with 13° east variation. Altitudes are feet above mean sea level unless a flight level is stated. These route diagrams are not to scale. Chart SSYDP02-187, revised 9 July 2026, from the fixed publication cycle effective 3 September 2026. Source: © Airservices Australia, Departure and Approach Procedures, SSYDP02-187.
Last modified on October 30, 2026