General
Use LNAV or VOR/LOC as required by the assigned VNAV approach. Establish the identified FAF and the correct along-approach distance before applying the 2-NM-before-FAF group. Distance to the airport is not an equivalent condition. Set the assigned DA(H)/MDA(H)-related MCP target using its applicable numerical value and reference. Before using the second-page condition Below 300 ft missed approach altitude, obtain its explicit interpretation. Do not substitute 300 ft AGL, radio altitude, or an inferred arithmetic rule. This is the supplied VNAV landing procedure. Use the assigned landing-continuation procedure after approach configuration.1. Flap lever — As directed
When the stated condition is satisfied, select the directed flap detent. Verify the required lever detent and actual flap/slat configuration.Checks and evidence
Checks and evidence
Expected response: As directedVerification: Verify the chosen lever detent and the required actual flap/slat configuration.
2. Below 300 ft missed approach altitude: MCP missed approach altitude — Set
Condition: Below 300 ft missed approach altitude. Set the assigned missed-approach altitude on the MCP at the stated condition. Verify the selected target independently of actual altitude. Establish the explicit interpretation of the stated condition before applying this step; it does not establish a 300 ft AGL or radio-altitude trigger.Checks and evidence
Checks and evidence
When: Below 300 ft missed approach altitude.Expected response: SetVerification: Read back the selected missed-approach target in feet.