General
Use this procedure only for the selected IAN-capable configuration and assigned approach. Glide path alive and glide path capture are separate conditions. Verify the applicable active and armed modes. The checklist’s lateral verification is Localizer capture. The EFB IAN description distinguishes FAC/G/P from ILS VOR/LOC/G/S. Apply an explicit interpretation for the selected IAN procedure. Do not force an ILS mode solely to match the checklist wording. The checklist ends with flap selection and missed-approach-altitude setting at glide-path capture. Use the assigned landing-continuation procedure for the remaining landing.1. At glide path capture: Flap lever — As directed
Condition: At glide path capture. When the stated condition is satisfied, select the directed flap detent. Verify the required lever detent and actual flap/slat configuration.Checks and evidence
Checks and evidence
When: At glide path capture.Expected response: As directedVerification: Verify the chosen lever detent and the required actual flap/slat configuration.
2. At glide path capture: MCP missed approach altitude — Set
Condition: At glide path capture. Set the assigned missed-approach altitude on the MCP at the stated condition. Verify the selected target independently of actual altitude.Checks and evidence
Checks and evidence
When: At glide path capture.Expected response: SetVerification: Read back the selected missed-approach target in feet.