Skip to main content
The general aviation (GA) apron is south of runway 12/30 and beside the terminal apron. This chart covers hardstands 51–60 and helicopter positions H1–H3.

​
Access and orientation

Taxiway C runs between the apron and runway 12/30. C2, C3 and C4 provide the labelled apron connections. Taxiway K is on the terminal-apron side, joining C toward the runway crossing. H is farther toward the terminal apron; J is shown across runway 12/30. Follow a cleared route before entering or crossing the runway. H1, H2 and H3 are along the C-facing edge between the C2 and C3 labels. In the diagram, H3 is leftmost, then H2, then H1. Their precise coordinates are in the table; the diagram’s left-to-right order is not stand-number order. The right-hand portion of the GA apron contains stands 51 and 52, beside C4 and K. Stands 53 and 54 form the next pair toward the centre. Stands 55, 56 and 57 form the middle column; 58, 59 and 60 form the column toward the left. The terminal apron lies to the right of this group.

​
Parking positions and wingspan limits

Coordinates are degrees, minutes and seconds. Elevations are feet. Capacity here means maximum wingspan in metres, not an aircraft type. No listed position has hydrant fuel.

​
Map details

The printed scale is 1:6,000, with a 0–150 m bar. Magnetic variation is 12° east. North arrows and the slanted coordinate grid establish orientation; the page edges do not represent cardinal directions. Published changes: H1, H2 and H3 labels; editorial. Chart SCBAP03-188, revised 3 September 2026, from the fixed publication cycle effective 3 September 2026. Source: © Airservices Australia, Departure and Approach Procedures, SCBAP03-188.
Last modified on October 30, 2026