General
Verify the flight-deck door, CDU display, N1 references, IAS references and Mode Control Panel for the assigned departure. Use the actual loading and applicable performance data. Close and verify the door lock independently. Confirm that the displayed reference speeds and N1 targets are the intended values; the presence of a bug or a successful data-entry action does not establish its correctness.1. Flight deck door — Closed/locked
Close the flight-deck door and verify its locked condition, not only that a close command was accepted.Checks and evidence
Checks and evidence
Expected response: Closed/lockedVerification: Require separate closed and locked evidence.
2. CDU display — Set
Select and verify the mission-required CDU page, using displayed labels rather than assumed LSK positions.Checks and evidence
Checks and evidence
Expected response: SetVerification: Verify the actual page and required data fields.
3. N1 bugs — Check
Cross-check the takeoff N1 reference bugs against the applicable performance data and actual aircraft configuration.Checks and evidence
Checks and evidence
Expected response: CheckVerification: Read the displayed target N1 values and compare with approved results; actual N1 is separate.
4. IAS bugs — Check
Cross-check the takeoff reference-speed bugs against the applicable V1, VR and V2 performance data.Checks and evidence
Checks and evidence
Expected response: CheckVerification: Verify the actual displayed reference speeds on the expected page/display.
5. MCP — Set
Set the assigned Mode Control Panel targets and switch selections. Verify each selected target and mode separately.Checks and evidence
Checks and evidence
Expected response: SetVerification: Read back each required target and switch separately.