Instruments, navigation and radios: controls and readings

Access through MCP

Use list_groups to discover cockpit groups. list_readings lists their readable values; read_group returns the current values. Available controls are listed below with their cockpit_* tool.

Flight instruments

Read this group with read_group:

{
  "group": "flight-instruments"
}

Controls

Call cockpit_flight_instruments with action and, where indicated, value or text.

Control	action	Input

Readings

Call read_reading with reading_id from this table, or read all values with read_group.

Reading	reading_id	Unit
Airspeed	`flight-instruments.airspeed`	kt
Altitude	`flight-instruments.altitude`	ft
Height AGL	`flight-instruments.height-agl`	ft
Latitude	`flight-instruments.latitude`	°
Longitude	`flight-instruments.longitude`	°
Ground speed	`flight-instruments.ground-speed`	kt
Vertical speed	`flight-instruments.vertical-speed`	ft/min
Pitch	`flight-instruments.pitch`	°
Roll	`flight-instruments.roll`	°
Heading	`flight-instruments.heading`	°
Elevation MSL	`flight-instruments.elevation-msl`	ft
On ground	`flight-instruments.on-ground`	—

Altimeter

Read this group with read_group:

{
  "group": "altimeter"
}

Controls

Call cockpit_altimeter with action and, where indicated, value or text.

Control	action	Input
Set altimeter	`set-altimeter`	setpoint; value: 28–31.5 inHg
STD	`std`	press

Readings

Call read_reading with reading_id from this table, or read all values with read_group.

Reading	reading_id	Unit
Setting	`altimeter.setting`	inHg
STD selected	`altimeter.std-selected`	—

Radios and ILS

Read this group with read_group:

{
  "group": "radios-and-ils"
}

Controls

Call cockpit_radios_and_ils with action and, where indicated, value or text.

Control	action	Input
Set Nav 1 standby frequency	`set-nav-1-standby-frequency`	setpoint; value: 108–117.95 MHz
Set Nav 2 standby frequency	`set-nav-2-standby-frequency`	setpoint; value: 108–117.95 MHz
Nav 1 swap	`nav-1-swap`	press
Nav 2 swap	`nav-2-swap`	press
Set Nav 1 course	`set-nav-1-course`	setpoint; value: 0–359 °
Set Nav 2 course	`set-nav-2-course`	setpoint; value: 0–359 °

Readings

Call read_reading with reading_id from this table, or read all values with read_group.

Reading	reading_id	Unit
Nav 1 frequency	`radios-and-ils.nav-1-frequency`	MHz
Nav 1 standby	`radios-and-ils.nav-1-standby`	MHz
Nav 1 course	`radios-and-ils.nav-1-course`	°
Nav 1 localizer	`radios-and-ils.nav-1-localizer`	dots
Nav 1 glideslope	`radios-and-ils.nav-1-glideslope`	dots
Nav 1 glideslope flag	`radios-and-ils.nav-1-glideslope-flag`	—
Nav 1 DME	`radios-and-ils.nav-1-dme`	nm
Nav 2 frequency	`radios-and-ils.nav-2-frequency`	MHz
Nav 2 standby	`radios-and-ils.nav-2-standby`	MHz
Nav 2 course	`radios-and-ils.nav-2-course`	°
Nav 2 localizer	`radios-and-ils.nav-2-localizer`	dots
Nav 2 glideslope	`radios-and-ils.nav-2-glideslope`	dots
Nav 2 DME	`radios-and-ils.nav-2-dme`	nm
Com 1 frequency	`radios-and-ils.com-1-frequency`	MHz
Com 1 standby	`radios-and-ils.com-1-standby`	MHz
Com 2 frequency	`radios-and-ils.com-2-frequency`	MHz
Com 2 standby	`radios-and-ils.com-2-standby`	MHz
Nav 1 ident	`radios-and-ils.nav-1-ident`	—
Nav 2 ident	`radios-and-ils.nav-2-ident`	—

IRS

Read this group with read_group:

{
  "group": "irs"
}

Controls

Call cockpit_irs with action and, where indicated, value or text.

Control	action	Input
IRS source	`irs-source`	select; -1=left, 0=center, 1=right
IRS left mode	`irs-left-mode`	select; 0=off, 1=align, 2=nav, 3=att
IRS right mode	`irs-right-mode`	select; 0=off, 1=align, 2=nav, 3=att
IRS system display	`irs-system-display`	select; 0=left, 1=right
IRS display select	`irs-display-select`	select; 0=test, 1=tk gs, 2=pos, 3=wind, 4=hdg sts
IRS display brightness	`irs-display-brightness`	setpoint; value: 0–1 ratio

Readings

Call read_reading with reading_id from this table, or read all values with read_group.

Reading	reading_id	Unit
IRS source	`irs.irs-source`	—
IRS left mode	`irs.irs-left-mode`	—
IRS right mode	`irs.irs-right-mode`	—
IRS system display	`irs.irs-system-display`	—
IRS display select	`irs.irs-display-select`	—
Align left	`irs.align-left`	—
Align right	`irs.align-right`	—
Align fail left	`irs.align-fail-left`	—
Align fail right	`irs.align-fail-right`	—
On DC left	`irs.on-dc-left`	—
On DC right	`irs.on-dc-right`	—
DC fail left	`irs.dc-fail-left`	—
DC fail right	`irs.dc-fail-right`	—

EFIS captain

Read this group with read_group:

{
  "group": "efis-captain"
}

Controls

Call cockpit_efis_captain with action and, where indicated, value or text.

Control	action	Input
Baro unit	`baro-unit`	select; 0=inHg, 1=hPa
VOR 1 switch	`vor-1-switch`	select; -1=vor, 0=off, 1=adf
VOR 2 switch	`vor-2-switch`	select; -1=vor, 0=off, 1=adf
WXR button	`wxr-button`	press
STA button	`sta-button`	press
WPT button	`wpt-button`	press
ARPT button	`arpt-button`	press
DATA button	`data-button`	press
POS button	`pos-button`	press
TERR button	`terr-button`	press
RST button	`rst-button`	press
CTR button	`ctr-button`	press
TFC button	`tfc-button`	press
meters button	`meters-button`	press
FPV button	`fpv-button`	press
Map mode up	`map-mode-up`	press
Map mode down	`map-mode-down`	press
Minimums	`minimums`	select; 0=radio, 1=baro
Map range	`map-range`	setpoint; value: 0–7 step
Decision height	`decision-height`	setpoint; value: 0–1000 ft

Readings

Call read_reading with reading_id from this table, or read all values with read_group.

Reading	reading_id	Unit
Baro unit	`efis-captain.baro-unit`	—
VOR 1 switch	`efis-captain.vor-1-switch`	—
VOR 2 switch	`efis-captain.vor-2-switch`	—

EFIS first officer

Read this group with read_group:

{
  "group": "efis-first-officer"
}

Controls

Call cockpit_efis_first_officer with action and, where indicated, value or text.

Control	action	Input
Baro unit	`baro-unit`	select; 0=inHg, 1=hPa
VOR 1 switch	`vor-1-switch`	select; -1=vor, 0=off, 1=adf
VOR 2 switch	`vor-2-switch`	select; -1=vor, 0=off, 1=adf
WXR button	`wxr-button`	press
STA button	`sta-button`	press
WPT button	`wpt-button`	press
ARPT button	`arpt-button`	press
DATA button	`data-button`	press
POS button	`pos-button`	press
TERR button	`terr-button`	press
RST button	`rst-button`	press
CTR button	`ctr-button`	press
TFC button	`tfc-button`	press
meters button	`meters-button`	press
FPV button	`fpv-button`	press
Map mode up	`map-mode-up`	press
Map mode down	`map-mode-down`	press
Minimums	`minimums`	select; 0=radio, 1=baro
Map range	`map-range`	setpoint; value: 0–7 step
Decision height	`decision-height`	setpoint; value: 0–1000 ft
STD button	`std-button`	press
Course	`course`	setpoint; value: 0–359 °
Flight director toggle	`flight-director-toggle`	press
Barometer	`barometer`	setpoint; value: 28–31 inHg

Readings

Call read_reading with reading_id from this table, or read all values with read_group.

Reading	reading_id	Unit
Baro unit	`efis-first-officer.baro-unit`	—
VOR 1 switch	`efis-first-officer.vor-1-switch`	—
VOR 2 switch	`efis-first-officer.vor-2-switch`	—

Display panels

Read this group with read_group:

{
  "group": "display-panels"
}

Controls

Call cockpit_display_panels with action and, where indicated, value or text.

Control	action	Input
Display control panel	`display-control-panel`	select; -1=both on 1, 0=normal, 1=both on 2
FMC source	`fmc-source`	select; -1=left, 0=both, 1=right
Display source	`display-source`	select; -1=all on 1, 0=auto, 1=all on 2
Speed reference	`speed-reference`	select; 0=position 0, 1=position 1, 2=position 2, 3=position 3, 4=position 4, 5=position 5, 6=position 6
Captain main panel DU	`captain-main-panel-du`	select; -1=eng prim, 0=norm, 1=pfd, 2=mfd
Captain lower DU	`captain-lower-du`	select; -1=eng prim, 0=norm, 1=mfd
First officer main panel DU	`first-officer-main-panel-du`	select; -1=position -1, 0=position 0, 1=position 1, 2=position 2, 3=position 3
First officer lower DU	`first-officer-lower-du`	select; -1=eng prim, 0=norm, 1=mfd
N1 set source	`n1-set-source`	select; -1=left, 0=auto, 1=right
VHF NAV source	`vhf-nav-source`	select; -1=left, 0=normal, 1=right
Speed reference adjust	`speed-reference-adjust`	setpoint; value: 0–300 kt
MFD SYS	`mfd-sys`	press
MFD ENG	`mfd-eng`	press
Captain A/P light	`captain-a-p-light`	press
Captain A/T light	`captain-a-t-light`	press
First officer A/P light	`first-officer-a-p-light`	press
First officer A/T light	`first-officer-a-t-light`	press

Readings

Call read_reading with reading_id from this table, or read all values with read_group.

Reading	reading_id	Unit
Display control panel	`display-panels.display-control-panel`	—
FMC source	`display-panels.fmc-source`	—
Display source	`display-panels.display-source`	—
Speed reference	`display-panels.speed-reference`	—
Captain main panel DU	`display-panels.captain-main-panel-du`	—
Captain lower DU	`display-panels.captain-lower-du`	—
First officer main panel DU	`display-panels.first-officer-main-panel-du`	—
First officer lower DU	`display-panels.first-officer-lower-du`	—
N1 set source	`display-panels.n1-set-source`	—
VHF NAV source	`display-panels.vhf-nav-source`	—

Radio panel and audio

Read this group with read_group:

{
  "group": "radio-panel-and-audio"
}

Controls

Call cockpit_radio_panel_and_audio with action and, where indicated, value or text.

Control	action	Input
Push to talk	`push-to-talk`	press
Left radio panel off	`left-radio-panel-off`	press
Left radio panel VHF L	`left-radio-panel-vhf-l`	press
Left radio panel VHF C	`left-radio-panel-vhf-c`	press
Left radio panel VHF R	`left-radio-panel-vhf-r`	press
Left radio panel HF L	`left-radio-panel-hf-l`	press
Left radio panel AM	`left-radio-panel-am`	press
Left radio panel HF R	`left-radio-panel-hf-r`	press
Right radio panel off	`right-radio-panel-off`	press
Right radio panel VHF L	`right-radio-panel-vhf-l`	press
Right radio panel VHF C	`right-radio-panel-vhf-c`	press
Right radio panel VHF R	`right-radio-panel-vhf-r`	press
Right radio panel HF L	`right-radio-panel-hf-l`	press
Right radio panel AM	`right-radio-panel-am`	press
Right radio panel HF R	`right-radio-panel-hf-r`	press
Left radio panel frequency transfer	`left-radio-panel-frequency-transfer`	press
Right radio panel frequency transfer	`right-radio-panel-frequency-transfer`	press
Left radio panel MHz up	`left-radio-panel-mhz-up`	press
Left radio panel MHz down	`left-radio-panel-mhz-down`	press
Left radio panel khz up	`left-radio-panel-khz-up`	press
Left radio panel khz down	`left-radio-panel-khz-down`	press
Right radio panel MHz up	`right-radio-panel-mhz-up`	press
Right radio panel MHz down	`right-radio-panel-mhz-down`	press
Right radio panel khz up	`right-radio-panel-khz-up`	press
Right radio panel khz down	`right-radio-panel-khz-down`	press
captain mic VHF 1	`captain-mic-vhf-1`	press
captain mic VHF 2	`captain-mic-vhf-2`	press
captain mic VHF 3	`captain-mic-vhf-3`	press
captain mic interphone	`captain-mic-interphone`	press
captain mic cabin	`captain-mic-cabin`	press
captain mic PA	`captain-mic-pa`	press
first officer mic VHF 1	`first-officer-mic-vhf-1`	press
first officer mic VHF 2	`first-officer-mic-vhf-2`	press
first officer mic VHF 3	`first-officer-mic-vhf-3`	press
first officer mic interphone	`first-officer-mic-interphone`	press
first officer mic cabin	`first-officer-mic-cabin`	press
first officer mic PA	`first-officer-mic-pa`	press
observer mic VHF 1	`observer-mic-vhf-1`	press
observer mic VHF 2	`observer-mic-vhf-2`	press
observer mic VHF 3	`observer-mic-vhf-3`	press
observer mic interphone	`observer-mic-interphone`	press
observer mic cabin	`observer-mic-cabin`	press
observer mic PA	`observer-mic-pa`	press

Readings

Call read_reading with reading_id from this table, or read all values with read_group.

Reading	reading_id	Unit
Left radio panel off selected	`radio-panel-and-audio.left-radio-panel-off-selected`	—
Left radio panel VHF L selected	`radio-panel-and-audio.left-radio-panel-vhf-l-selected`	—
Left radio panel VHF C selected	`radio-panel-and-audio.left-radio-panel-vhf-c-selected`	—
Left radio panel VHF R selected	`radio-panel-and-audio.left-radio-panel-vhf-r-selected`	—
Left radio panel HF L selected	`radio-panel-and-audio.left-radio-panel-hf-l-selected`	—
Left radio panel AM selected	`radio-panel-and-audio.left-radio-panel-am-selected`	—
Left radio panel HF R selected	`radio-panel-and-audio.left-radio-panel-hf-r-selected`	—
Right radio panel off selected	`radio-panel-and-audio.right-radio-panel-off-selected`	—
Right radio panel VHF L selected	`radio-panel-and-audio.right-radio-panel-vhf-l-selected`	—
Right radio panel VHF C selected	`radio-panel-and-audio.right-radio-panel-vhf-c-selected`	—
Right radio panel VHF R selected	`radio-panel-and-audio.right-radio-panel-vhf-r-selected`	—
Right radio panel HF L selected	`radio-panel-and-audio.right-radio-panel-hf-l-selected`	—
Right radio panel AM selected	`radio-panel-and-audio.right-radio-panel-am-selected`	—
Right radio panel HF R selected	`radio-panel-and-audio.right-radio-panel-hf-r-selected`	—

Getting started

Submit an agent

Aircraft

Scenarios

Airports

Instruments, navigation and radios: controls and readings

Access through MCP

Flight instruments

Controls

Readings

Altimeter

Controls

Readings

Radios and ILS

Controls

Readings

IRS

Controls

Readings

EFIS captain

Controls

Readings

EFIS first officer

Controls

Readings

Display panels

Controls

Readings

Radio panel and audio

Controls

Readings

​Access through MCP

​Flight instruments

​Controls

​Readings

​Altimeter

​Controls

​Readings

​Radios and ILS

​Controls

​Readings

​IRS

​Controls

​Readings

​EFIS captain

​Controls

​Readings

​EFIS first officer

​Controls

​Readings

​Display panels

​Controls

​Readings

​Radio panel and audio

​Controls

​Readings

Access through MCP

Flight instruments

Controls

Readings

Altimeter

Controls

Readings

Radios and ILS

Controls

Readings

IRS

Controls

Readings

EFIS captain

Controls

Readings

EFIS first officer

Controls

Readings

Display panels

Controls

Readings

Radio panel and audio

Controls

Readings