> ## Documentation Index
> Fetch the complete documentation index at: https://www.narev.ai/docs/llms.txt
> Use this file to discover all available pages before exploring further.

# Canberra ILS-Y or LOC-Y runway 35

> Frequencies, approach fixes, profile, minima and missed approach for YSCB runway 35.

This approach follows the **348° magnetic** inbound track to Canberra runway 35. The ILS has a **3° glidepath**; the localizer-only procedure uses the distance and altitude checks below. Use QNH. Heights in the minima table are above the runway threshold; other elevations are feet AMSL.

The chart belongs to the simulator’s fixed **3 September 2026** publication cycle. Its individual revision is **19 March 2026**, chart **SCBII02-186**. Reconcile the chart with the simulator’s installed navigation data before use.

## Radio and navigation setup

| Service or aid | Frequency / identification |
| - | - |
| Canberra VOR/DME | **CB 116.7 MHz** |
| Runway 35 ILS/DME | **ICB 109.5 MHz** |
| ATIS | 116.7 MHz, 127.45 MHz, 263 kHz (NDB) |
| AWIS, after hours | 116.7 MHz |
| Approach | 124.5 MHz |
| Tower | 118.7 MHz |
| Surface movement / airways clearance | 121.7 MHz |
| Flight information, after hours | ML CEN 125.9 MHz |
| CTAF + AFRU, after hours | 118.7 MHz |
| AFRU + PAL, after hours | 118.7 MHz |

The chart requires **DME or GNSS**. GNSS may substitute for DME using **CB VOR** as the reference waypoint. Distances in the profile and tables are **NM to CB DME**, not distance to the runway threshold and not an instruction to substitute ICB DME.

Aerodrome elevation is **1,887 ft**. Runway 35 threshold elevation is **1,869 ft**; reference datum height is **50 ft**. The chart’s magnetic variation is **12° E**.

## Approach sequence

Read the selected arrival and clearance together with this approach. The plan view shows AVBEG/POLLI arrivals via the southern entry area and BUNGO/LEECE arrivals toward GIBIL. It identifies CB radial 143° and lead radial 159° in that area, a 13 NM CB arc at 6,000 ft, and an inner arc at 5,100 ft; the arrival procedure determines the route to the approach.

| Fix or profile point | NM to CB DME | NM to threshold 35 | Profile information |
| - | -: | -: | - |
| MENZI | 14.9 | 12.9 | 5,400 ft entry shown in the profile |
| KATIA | 12.9 | 10.9 | 5,100 ft localizer procedure altitude |
| Intermediate distance | 12.0 | 10.0 | 5,100 ft localizer procedure altitude |
| MOMBI | 10.9 | 8.9 | 4,600 ft localizer procedure altitude |
| Intermediate distance | 7.9 | 5.9 | 3,800 ft localizer procedure altitude |
| Intermediate distance | 6.8 | 4.8 | 3,400 ft localizer procedure altitude |
| DAMKO | 5.8 | 3.8 | 3,100 ft localizer procedure altitude |
| Localizer MAPt | 2.9 | 0.9 | Missed approach point for the localizer procedure |
| Threshold 35 | — | 0 | Threshold elevation 1,869 ft |

The 3° altitude checks are a separate table. Do not confuse those calculated path values with the localizer procedure altitudes printed in the profile.

## 3° approach-path altitude checks

| NM to CB DME | Altitude, ft AMSL |
| -: | -: |
| 4.5 | 2,700 |
| 5.0 | 2,870 |
| 5.8 | 3,140 |
| 6.8 | 3,460 |
| 7.0 | 3,510 |
| 7.9 | 3,810 |
| 9.0 | 4,150 |
| 10.0 | 4,470 |
| 10.9 | 4,760 |
| 11.0 | 4,790 |
| 12.0 | 5,110 |
| 12.9 | 5,400 |

## Holding at MOMBI

The hold is right-hand with an inbound track of **348°**, a DME limit of **14 NM CB** at **5,100 ft**. The 5,600 ft row specifies a **1-minute** time and no DME limit; the 5,100 ft row has no time specified. The chart depicts 098°, 168° and 278° sector boundaries around the holding pattern.

| Minimum holding altitude | Maximum IAS |
| -: | -: |
| 5,100 ft | 170 kt |
| 5,600 ft | 210 kt |

Aircraft holding at MOMBI may begin descent once established inbound on the approach. This note does not remove the approach’s altitude restrictions.

## Missed approach

**Track 348°. Climb to 5,100 ft, or as directed by ATC.** The localizer missed approach begins at **2.9 NM CB DME**. The selected ILS minima determine the required initial missed-approach gradient: apply that gradient to **3,200 ft**, then **2.5%**.

## Minima

The straight-in minima apply to categories A–D. Visibility is in kilometres; RVR is in metres. Parentheses contain height above the runway threshold for straight-in minima and the chart’s published height/visibility notation for circling and alternate minima.

| Procedure | Altitude, ft AMSL | Height, ft | Visibility and RVR | Missed-approach requirement |
| - | -: | -: | - | - |
| ILS CAT I | 2,170 | 301 | VIS 0.8 km, RVR 750 m; with actual QNH, VIS 0.8 km and RVR 550 m | 4.4% to 3,200 ft, then 2.5% |
| ILS CAT I | 2,420 | 551 | VIS 2.2 km; with actual QNH, VIS 1.6 km | 2.5% |
| LOC | 2,700 | 831 | VIS 3.9 km | See published missed approach |

| Category | Circling altitude and visibility | Alternate minima |
| - | - | - |
| A | 3,350 ft (1,463–2.4) | (1,963–4.4) |
| B | 3,350 ft (1,463–2.4) | (1,963–4.4) |
| C | 3,580 ft (1,693–4.0) | (2,193–6.0) |
| D | 3,720 ft (1,833–5.0) | (2,333–7.0) |

**No circling beyond 4 NM west of runway 17/35.** The chart also directs readers to the special notices for its use of colour.

## Terrain, airspace and minimum sector altitudes

The **10 NM MSA is 5,100 ft**, referenced to CB VOR or NDB. The 25 NM MSA diagram divides the surrounding area at CB radials **305°, 070° and 255°**: **4,600 ft** in the northern/eastern sector from 305° clockwise to 070°, **7,500 ft** from 070° clockwise to 255°, and **5,900 ft** from 255° clockwise to 305°.

The plan view marks R450A with upper limit **3,500 ft** and lower limit **SFC**, R450B **4,500/3,500 ft**, R450C **8,000/4,500 ft**. Their boundaries and the surrounding terrain still require a complete text description. These airspace labels do not provide clearance to enter them.

The charted spot elevations include 2,226, 2,241, 2,289, 2,425, 2,506, 2,565, 2,604, 2,641, 2,667, 2,810, 2,839, 2,880, 2,944, 3,020, 3,245, 3,311, 3,344, 3,543 and 3,671 ft. Use the procedure altitudes and restrictions; a list of spot elevations is not terrain clearance.

Source: © Airservices Australia, [Departure and Approach Procedures](https://www.airservicesaustralia.com/aip/current/dap/), SCBII02-186. Text adapted from the repository’s fixed chart snapshot. Published change note: **HOLDING NOTE**.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.