> ## Documentation Index
> Fetch the complete documentation index at: https://www.narev.ai/docs/llms.txt
> Use this file to discover all available pages before exploring further.

# VNAV landing — part 2

> VNAV landing — part 2: conditions, actions and checks for the Boeing 737-800.

Use this procedure when its prerequisites apply. Confirm each required aircraft state before acknowledging the corresponding checklist item.

## General

Use LNAV or VOR/LOC as required by the assigned VNAV approach. Establish the identified FAF and the correct along-approach distance before applying the 2-NM-before-FAF group. Distance to the airport is not an equivalent condition.

Set the assigned DA(H)/MDA(H)-related MCP target using its applicable numerical value and reference. Before using the second-page condition **Below 300 ft missed approach altitude**, obtain its explicit interpretation. Do not substitute 300 ft AGL, radio altitude, or an inferred arithmetic rule.

This is the supplied VNAV landing procedure. Use the assigned landing-continuation procedure after approach configuration.

### 1. Flap lever — **As directed**

When the stated condition is satisfied, select the directed flap detent. Verify the required lever detent and actual flap/slat configuration.

> **Checks and evidence**
>
> **Expected response:** As directed
>
> **Verification:** Verify the chosen lever detent and the required actual flap/slat configuration.

### 2. Below 300 ft missed approach altitude: MCP missed approach altitude — **Set**

**Condition:** Below 300 ft missed approach altitude.

Set the assigned missed-approach altitude on the MCP at the stated condition. Verify the selected target independently of actual altitude. Establish the explicit interpretation of the stated condition before applying this step; it does not establish a 300 ft AGL or radio-altitude trigger.

> **Checks and evidence**
>
> **When:** Below 300 ft missed approach altitude.
>
> **Expected response:** Set
>
> **Verification:** Read back the selected missed-approach target in feet.

## Continue after this procedure

No explicit source transition is declared. Select the next applicable procedure after the required completion and entry conditions are established.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.