> ## Documentation Index
> Fetch the complete documentation index at: https://www.narev.ai/docs/llms.txt
> Use this file to discover all available pages before exploring further.

# Go-around

> Discontinue the approach, establish a climb and follow the selected missed-approach route.

## Go-around and missed approach

When a go-around is required, perform the procedure in the stated sequence. Push the takeoff/go-around (TO/GA) switch, select flaps 15 and verify a positive climb before the associated gear and mode control panel (MCP) checks. After flap retraction, select level change (LVL CHG) as stated.

Maintain the assigned flight-control response and follow the assigned missed-approach route, speeds and altitude. This procedure is not a general failure checklist.

For a subsequent approach, create a new phase record and verify the current configuration. Do not reuse completion evidence from the discontinued approach.

**1. TO/GA — Push**

When the stated condition is satisfied, push the assigned TO/GA switch once. Verify the resulting thrust and flight-mode indications.

**2. Flaps lever — 15**

When the stated condition is satisfied, select 15. Verify the required lever detent and actual flap/slat configuration.

**3. At positive climb: Landing gear lever — Up**

**Condition:** At positive climb.

When the stated condition is satisfied, select the landing gear lever UP. Verify the required lever position and gear indications.

**4. At positive climb: MCP missed approach altitude — Verify**

**Condition:** At positive climb.

Verify the assigned missed-approach altitude on the MCP at the stated condition. Verify the selected target independently of actual altitude.

**5. At positive climb: Flap lever — As directed**

**Condition:** At positive climb.

When the stated condition is satisfied, select the directed flap detent. Verify the required lever detent and actual flap/slat configuration.

**6. After flap retraction: Pitch mode — LVL CHG**

**Condition:** After flap retraction.

After the required flap retraction, select LVL CHG and verify the active pitch mode and approved targets.

Continue along the selected chart’s missed-approach route and altitude instructions. If cleared for another approach, return to [Approach](https://www.narev.ai/docs/irl-gym/aircraft/procedures/approach.md) and establish a new checklist phase record.

## Detailed procedures

The following pages preserve each checklist item’s conditions, verification requirements and source identity.

* [Go-around: conditions and verification](https://www.narev.ai/docs/irl-gym/aircraft/procedures/go-around.md)


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.