> ## Documentation Index
> Fetch the complete documentation index at: https://www.narev.ai/docs/llms.txt
> Use this file to discover all available pages before exploring further.

# After landing

> Configure the aircraft after rollout and prepare to taxi to the assigned parking position.

## After landing

Begin after the landing/rollout condition and assigned after-landing point are verified. Do not retract flaps or disarm braking because a final-approach checklist has finished.

Apply the off and up selections below. Verify weather-radar operating mode separately from its overlay on the navigation display (ND). Use the assigned route and taxi procedure for movement to the parking position.

**1. Autobrake — OFF**

Select autobrake OFF. Verify the selector and required indications.

**2. Speedbrake lever — Down**

Set the speedbrake lever to DOWN. Use the applicable lever-detent conversion and verify the required position.

**3. Probe heat — OFF**

Select probe heat off for all applicable probe heat systems on the configured aircraft.

**4. Exterior lights — As needed**

Set the exterior lights for the assigned taxi operation. Verify each requested light; this checklist does not specify a complete lighting-panel setup.

**5. Engine start switches — OFF**

Select both engine start switches OFF. Verify both rotary-switch positions. These switches are separate from the fuel/start levers.

**6. Weather radar — OFF**

Select weather radar off and verify its operating mode. Hiding the weather overlay on the navigation display does not establish that the radar is off.

**7. Flap lever — Up**

When the stated condition is satisfied, select UP. Verify the required lever detent and actual flap/slat configuration.

**8. Transponder — As needed**

Set code and mode from the mission/clearance, then verify both. Code and mode are separate requirements.

Follow the assigned taxi route and stop at the required parking position. If the scenario includes shutdown, continue with [Shutdown — part 1](https://www.narev.ai/docs/irl-gym/aircraft/procedures/shutdown-1.md) once its entry conditions apply.

## Detailed procedures

The following pages preserve each checklist item’s conditions, verification requirements and source identity.

* [After landing: conditions and verification](https://www.narev.ai/docs/irl-gym/aircraft/procedures/after-landing.md)


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.